Ridge Detail

TOP RIDGE PLACEMENT

The placement of the top ridge accessory should start from one side.

The first ridge should be cut in half to avoid overlapping of four shingles where the DURAMIT PVC Panel Shingles are one over the other.

The ridge accessory should be assemble on top of the main pvc panel shingle with self-tapping screws. 






CORNER RIDGE

During its placement, the corner ridge should be alligned with the center line. The pre-formed corners should be fixed to the PVC panel shingle cover with 75mm in length and 6.3 mm in diameter self-tapping screws. The corner ridge should be placed top-down by placing 50mm of the parts over one another. 








3-WAY RIDGE

In a four-way inclined roof, a 3-way ridge is utilized as a connective element in between a flat ridge and a corner ridge.